Categories
Stage 2 CDR Writing

Competency Standards Stage 2 For Professional Engineer

Competency Standards Stage 2 for Professional Engineer

Engineers Australia defines the Competency Standards Stage 2 as an assessment parameter to attain the Chartered Professional Engineer status. Wherein, the Chartered status is about attaining the certification of Professional Engineering. Chartered Professionals are expected to have reached the highest level of professional competence in the concerned domain, through years of experience and practice.

Stage 2 Competency

Stage 2 Competency assessment for Chartered membership, is a government requirement for professional credential recognition amongst business and general public worldwide. Once you attain the CPEng, it is a binding obligation to maintain the same level of competence in the concerned domain.

The Competency Standards Stage 2 assessments for CPEng, for Professional Engineer opens opportunity to achieve Chartered membership of Engineers Australia (CEngT). Not limited to this, the individual also gets registered with National Engineering Register (NER).

As a certified Chartered Professional Engineer, one needs to demonstrate highest levels of competence in domains like Subject Expertise, Leadership abilities, Quality, and Safety. Demonstrating the expected performance abilities towards engineering applications and other professional skills; in addition to the desired level of attitudes and values. All of this allows the EA to certify the individual as an independent Professional Engineer, who is then awarded the licence to practice unsupervised. A professional intervention with documentation to boost your claims, certainly helps to create lasting impressions. At CDRReport we do just that.

Expectations from a Professional Engineer

Professional Engineers aspiring for CPEng are bound to demonstrate certain levels of competence in the practice area throughout their career. They must also display ability to effectively utilize such competence levels, and an ability to conduct themselves well in different scenarios.

Amongst the Various Expectations from Experienced Professional Engineers, some are

  • Must understand explicit and implicit requirements shared by the clients; and expectations of all stakeholders (society involved)
  • Must optimise social, economic, and environmental outcomes over and beyond the full life time of concerned project/program
  • Being an effective bridge between multitude disciplines, professional domains, and people
  • Interpreting technology aided possibilities to business, society in general, and government
  • Integration of technical as well as non-technical considerations
  • Managing risks and dealing effectively with sustainability issues, amongst others

Documentation Expected Towards the Application

While applying for CPEng towards Chartered Status recognition as a Professional Engineer, there are multiple documentation procedures. Each one of the required document is used as an evidence towards your claims about the engineering competency. Below mentioned are the submission items, as required by the Engineers Australia, towards registration as a Chartered Professional Engineer.

  1. Engineering Competency Claims (ECCs)
  2. Engineering Experience Record (EER)
  3. Continuing Professional Development (CPD) Record
  4. An up to date CV

Wherein, Engineering Competency Claims defines how involved you have been at a personal level, in technical engineering projects. Professional writers and engineering experts at CDRReport strengthen your claims with their apt words. The Stage 2 Competency Standards focus on aspects like: commitment to service, demonstration of value at the workplace, ability to reflect technical proficiency, and obligation that one as an engineer has towards the community in general.

Engineering Experience Record (EER) collates a summary description of your employment background, encompassing all the roles experienced by you, in about 700 words. These submission items require a thorough understanding of the EA expectations and are pretty complex and time consuming.

The kind of submissions will further depend depend upon the choice of assessment pathway selected. You can choose an appropriate pathway towards the eChartered Competency Assessment.

  1. Professional Development Program (PDP)
  2. Engineering Competency Report (ECR)
  3. Mature Experience Engineer (MEE)
  4. Mutual Recognition Agreement (MRA)

As you chose the eChartered Pathway for submission, the total number of ECCs or engineering competency claims, will lie between 11 to 16. Those opting for Engineering Competency Report (or ECR pathway) will be required to submit 16 ECCs (engineering competency claims). Here, each of the ECC claim goes in great details about the personal experience and exposure, in technical projects. Wherein, the ECCs are always prepared basis the Stage 2 Competency Standards as shared by the EA (Engineers Australia). It becomes tedious and time consuming to bring out the best in these 16 ECCs; something that is impactful enough. With CDRReport you have no worries.

Four essential elements of EA Stage 2 Competency Standards:

  1. Personal commitment towards the service requirement, as an engineer
  2. Adherence to values at workplace, as an engineer
  3. Displaying technical proficiency, as an engineer
  4. Community obligation, as an engineer

CDRReport can assist you with your document submissions towards the Chartered Status (CPEng) registration process with the EA (Engineers Australia). Our expert team can help you with ECC, EER, CPD, and all other document submissions. We offer assistance and review with each of these document, as desired.

Categories
Stage 2 CDR Writing

Competency Standards Stage 2 For Engineering Technologist

Competency Standards Stage 2 for Engineering Technologist

Competency Standards Stage 2 for Engineering Technologist is a certification towards attaining the Chartered status. A Chartered Engineering Technologist is thereby deemed to own the highest level of proficiency and professionalism through practice. Engineers Australia would consider one to have achieved the status upon demonstrating certain established levels of engineering competency, values and attitudes.

Stage 2 Competency

Stage 2 Competency assessment is a mandate to achieve the Chartered membership in the concerned functional area. It allows a credential recognition with the government, general public, and business worldwide. As you go for a CEngT recognition, it calls for a binding obligation from your end to maintain high levels of competence in the respective domain.

The CEngT status for an Engineering Technologist opens doors to achieve the Chartered Membership of Engineers Australia (CEngT). In addition to a registration with the National Engineering Register (NER).

As a certified Engineering Technologist, one needs to demonstrate highest levels of competence in the desired operational domain and the ability to effectively apply that level of competence. Professionals with immense exposure to the documentation for CEngT application can make the path smoother for individuals. It is immensely important to be correct and impactful with your application at the same time. CDRReport offers holistic and sectional assistance with the application process.

Expectations from an Engineering Technologist

Right from the level of competence, one’s ability to utilize the same, to self-conduct; the community of Engineering Technologists have certain basic expectations from every member.

Amongst the Various Expectations from Experienced Engineering Technologists, some are

  • Responsibility towards different engineering functions, projects, services etc. within the specified domain, at an operational level
  • Managing contributions towards specialist work from a broader engineering perspective to establish a system or solution
  • Displaying sustainable solutions towards optimising the social, environmental, and technical outcomes, throughout the systems life cycle
  • Ensuring that at a holistic level all aspects of a product/operation are firmly adhering to established theories and fundamental principles
  • Operating within the broad technical environment, while undertaking a wide range of functions and responsibilities

Stage 2 competency standards come with expectations that ask for personal commitment towards the project, larger commitment toward the society, value adherence at the workplace, and technical proficiency in the domain.

As the EA (Engineers Australia) desires a certain set of documents to be submitted to apply for the Stage 2 Competency Standards, you need to focus on presenting those written accounts of work that hold the stage strong for you. Professional writers and engineers at CDRReport assist and review your application procedure by careful evaluation of these documents. Your past contributions in the domain must highlight adherence to established engineering operations. At CDRReport we help you chose the best alignment.

Apply for Chartered Engineering Technologist

As you apply towards the Chartered Status recognition for an Engineering Technologist, CDRReport can help you with the assistance and review of the following documents.

  1. Engineering Competency Claims
  2. Engineering Experience Record
  3. Continuing Professional Development (CPD) Record
  4. An up to date CV

With the ECC submission, you offer pieces of evidence against your personal involvement in the concerned engineering domain.

While the EER submissions collate a summary of your employment record. It speaks of the entire tenure that you have been professionally employed for and elaborates your roles and responsibilities at different stages. This is a short 700 worded statement that needs all the precision and a professional intervention here can help save a lot of time and energy, contemplating what to write.

Other submissions depend upon the choice of pathway one selects towards the assessments. You can choose from amongst the following:

  1. Professional Development Program (PDP)
  2. Engineering Competency Report (ECR)
  3. Mature Experience Engineer (MEE)
  4. Mutual Recognition Agreement (MRA)

Upon the final choice, one needs to justify towards 11-16 Engineering Competency Claims (ECCs), depending upon the chosen eChartered Pathway. For instance, an ECR (Engineering Competency Report) Pathway calls for 16 ECCs. Wherein, every one of these ECCs requires in-depth details on the personal experiences and professional learnings in different technical projects one has been a part of. The writers and engineers at CDRReport discuss things in great details and seek information in the form of a questionnaire to eventually outline the same in your application, impactfully.

CDRReport believes in making the tedious journey to attain the CEngT smooth for you. Professional ability to bring out the best from amongst your varied experiences is something we excel at. Our experts offer assistance and review with EER, ECC, CPD, and other documentation.

Categories
Stage 2 CDR Writing

Competency Standards Stage 2 For Engineering Associate

Competency Standards Stage 2 for Engineering Associate

The Stage 2 Competency Standards are about the depth of professional understanding, knowledge and skills, values, attitudes and more. All of which need to be adhered to and practised while working as an independent or unsupervised engineering associate. From a broader perspective, it goes far beyond the ability to perform specific tasks.

The Competency Standards Stage 2 is taken as a base point towards the assessment for Chartered membership of Engineers Australia (CEngA). This also becomes a parameter to get registered under the National Engineering Register (NER).

Stage 2 Competency Standards

This Chartered status is exclusive to Engineers Australia. It is about the recognition of your credentials in the engineering domain. And, its greater acceptance by the governments, business houses, and the general public, the world over. Of course, as you achieve the CEngA status you are in for a lifelong obligation towards maintaining a certain level of competence, in the given area. Which will come with years of experience, exposure and practice?

As an integral step towards the achievement of the CEngA status, The Competency Standards Stage 2 assessments open doors of opportunities. However, there are four units of consideration across all engineering domains. And, a certified Engineering Associate needs to achieve the desired levels of score across these competence elements and the indicators of their attainment. These four units being:

  • Personal commitment
  • An obligation to the community
  • Values adhered to at the workplace
  • Technical Proficiency

Here the competence elements define the unit of competence and the indicators of their attainments act as the guide towards the kind of engineering work that would demonstrate attainment of the specific competence.

Expectations from an Engineering Associate

As a certified Chartered Engineering Associate, an individual is bound by various obligations:

  • An engineering associate needs to hold a strong base of Engineering Science and principles in the domain of expertise. This helps them scale up and offer versatility across varied applications and scenarios, in the field of practice.
  • An engineering associate must be adept at a plethora of functions like design and development, procedural documentation, system maintenance, quality assurance, operations management, project management, facility management, presentations, reporting, testing, manufacturing etc.
  • He must adhere to the established standards and codes in the domain and must be fluent with an adaptation of the technology across different applications
  • He must have a strong hold on the design and development aspect of it all, and be conversant with the usage of advanced software towards designing of structures and systems, electrical equipment, communication systems etc.
  • An engineering associate must conveniently design and construct experimental or prototype equipment
  • He must develop the broader knowledge areas through practice and experience.

Documentation Expected Towards the Application

As one applies for the CEngA status, there are a plethora of documental requirements. The documents act as evidence against the professional and personal claims, and also towards the level of engineering competency claimed. These are the basic submission items that are desired the EA

(Engineers Australia), to move further with your registration as a Chartered Engineering Associate.

  1. Engineering Competency Claims (ECCs)
  2. Engineering Experience Record (EER)
  3. Continuing Professional Development (CPD) Record
  4. An up to date CV

The ECC or your Engineering Competency Claims reflect your involvement in core technical aspects of different engineering projects worked upon/undertaken. One needs to adhere to the fact that these Stage 2 Competency Standards focus on different aspects like service commitment, values at the workplace, technical proficiency, obligation to the community, and more.

Engineering Experience Record (EER), is a 700 worded summary description of your employment background. That goes into the finer details of the different roles that you have worked across and the enriching experiences. One needs to understand the fact that these submission items can only be correctly addressed, upon a careful understanding and adaptation of the EA guidelines.

Furthermore, the process of submission is also dependent on the choice of appropriate pathway for eChartered Competency Assessment

  1. Professional Development Program (PDP)
  2. Engineering Competency Report (ECR)
  3. Mature Experience Engineer (MEE)
  4. Mutual Recognition Agreement (MRA)

While you decide on the same, remember that the ECCs or the Engineering Competency Claims vary likewise. For instance, if Mr A chooses the ECR (Engineering Competency Report), he is required to submit 16 ECCs.

Here, every Engineering Competency Claim offers a detailed picture of your personal involvement, when it comes to the technical projects. Each of these ECCs is prepared and defined basis the Stage 2 Competency Standards, as published by the Engineers Australia. Finally, we can say that these Stage 2 parameters are essentially focused on:

  1. Representation of your personal commitment towards the domain
  2. Your abidance to the value systems, in and around the workplace
  3. The level of technical proficiency displayed
  4. As an engineer, your obligation to the community

CDRReport is undoubtedly your go-to partner as you apply for the CEngA status. Think us, when you think of going ahead with this complex, yet important process. We offer expertise, assistance, and review towards all kinds of document submissions.